Steam-explosion pretreatment for enhancing anaerobic digestion of municipal wastewater sludge.

This study evaluated the use of steam explosion as a pretreatment for municipal wastewater treatment sludges and biosolids as a technique for enhancing biogas generation during anaerobic digestion. Samples of dewatered anaerobic digester effluent (biosolids) and a mixture of thickened waste activated sludge (TWAS) and biosolids were steam-exploded under differing levels of intensity in this study. The results indicate that steam explosion can solublize components of these sludge streams. Increasing the intensity of the steam-explosion pressure and temperature resulted in increased solublization. The steam-explosion pretreatment also increased the bioavailability of sludge components under anaerobic digestion conditions. Increasing the steam-explosion intensity increased the ultimate yield of methane during anaerobic digestion. Batch anaerobic digestion tests suggested that pretreatment at 300 psi was the most optimal condition for enhanced biogas generation while minimizing energy input. Semicontinuous anaerobic digestion revealed that the results that were observed in the batch tests were sustainable in prolonged operation. Semicontinuous digestion of the TWAS/biosolids mixture that was pretreated at 300 psi generated approximately 50% more biogas than the controls. Semicontinuous digestion of the pretreated biosolids resulted in a 3-fold increase in biogas compared with the controls. Based on capillary suction test results, steam-explosion pretreatment at 300 psi improved the dewaterability of the final digested sludge by 32 and 45% for the TWAS/ biosolids mixture and biosolids, respectively, compared with controls. The energy requirements of the nonoptimized steam-explosion process were substantially higher than the additional energy produced from enhanced digestion of the pretreated sludge. Substantial improvements in energy efficiency will be required to make the process viable from an energy perspective.     

Estrogenicity and acute toxicity of selected anilines using a recombinant yeast assay

Suspected estrogen modulators include industrial organic chemicals (i.e., xenoestrogens), and have been shown to consist of alkylphenols, bisphenols, biphenylols, and some hydroxy-substituted polycyclic aromatic hydrocarbons. The most prominent structural feature identified to be important for estrogenic activity is a polar group capable of donating hydrogen bonds (i.e., hydroxyl) on an aromatic system. The present study was undertaken to explore the estrogenic activity and acute toxicity of chemicals containing a weaker hydrogen bond donor group on aromatic systems, i.e., the amino substituent. There is a great deal of chemical similarity between aromatic amines (anilines) and aromatic alcohols (phenols). The chemicals chosen for the current study contained an amino-substituted benzene ring with hydrophobic constituents varying in size and shape. Thus, 37 substituted aromatic amines were assayed for estrogenic activity EC50 and acute toxicity LC50 using the Saccharomyces cerevisiae recombinant yeast assay. While the EC50 of 17-beta-estradiol occurs at the 10(-10) range, the aniline with the greatest activity had an EC50 of 10(-6) M. Thus, anilines, in general, are capable only of very weak estrogenic activity in this assay. A comparison of estrogenic potency between the present group of anilines and a set of previously tested analogous phenols indicated that anilines are consistently less estrogenic than phenols. A comparison of hazard indices (EC50/LC50) of these chemicals revealed that, for the vast majority of anilines, the EC50 and LC50 were in the same order of magnitude. More specifically, estrogenic activity of para-substituted alkylanilines increases with alkyl group size up to 5 carbons in length, after which the acute toxicity of the larger alkyl-substituents precluded the ability of the compound to induce the estrogenic response.     

Analytical solutions to compartmental indoor air quality models with application to environmental tobacco smoke concentrations measured in a house

This paper derives the analytical solutions to multi-compartment indoor air quality models for predicting indoor air pollutant concentrations in the home and evaluates the solutions using experimental measurements in the rooms of a single-story residence. The model uses Laplace transform methods to solve the mass balance equations for two interconnected compartments, obtaining analytical solutions that can be applied without a computer. Environmental tobacco smoke (ETS) sources such as the cigarette typically emit pollutants for relatively short times (7-11 min) and are represented mathematically by a "rectangular" source emission time function, or approximated by a short-duration source called an "impulse" time function. Other time-varying indoor sources also can be represented by Laplace transforms. The two-compartment model is more complicated than the single-compartment model and has more parameters, including the cigarette or combustion source emission rate as a function of time, room volumes, compartmental air change rates, and interzonal air flow factors expressed as dimensionless ratios. This paper provides analytical solutions for the impulse, step (Heaviside), and rectangular source emission time functions. It evaluates the indoor model in an unoccupied two-bedroom home using cigars and cigarettes as sources with continuous measurements of carbon monoxide (CO), respirable suspended particles (RSP), and particulate polycyclic aromatic hydrocarbons (PPAH). Fine particle mass concentrations (RSP or PM3.5) are measured using real-time monitors. In our experiments, simultaneous measurements of concentrations at three heights in a bedroom confirm an important assumption of the model-spatial uniformity of mixing. The parameter values of the two-compartment model were obtained using a "grid search" optimization method, and the predicted solutions agreed well with the measured concentration time series in the rooms of the home. The door and window positions in each room had considerable effect on the pollutant concentrations observed in the home. Because of the small volumes and low air change rates of most homes, indoor pollutant concentrations from smoking activity in a home can be very high and can persist at measurable levels indoors for many hours.     

Idiosyncratic deals in contemporary organizations: A qualitative and meta‐analytical review

Idiosyncratic deals (i‐deals) research focuses on the emergence of customized work arrangements employees negotiate with their employers. This article provides a critical review and synthesis of i‐deals research, combining a qualitative review of i‐deals theory and research with a supplementary meta‐analysis of 23 empirical studies (k = 27 samples, N = 8110 individuals). The qualitative review examines the conceptualization and measurement of i‐deals and identifies patterns and gaps in i‐deals research, while the quantitative meta‐analysis tests the moderating effect of societal cultures on the predictors and consequences of ideals investigated to date. In each section, attention is given to strengths and weaknesses of current approaches to i‐deals theory and research. Future research directions are identified with particular emphasis on the largely unexamined role of i‐deals from a multilevel perspective. Copyright © 2014 John Wiley & Sons, Ltd.     

Storm impacts along European coastlines. Part 2: lessons learned from the MICORE project

This paper describes the MICORE approach to quantify for nine field sites the crucial storm related physical hazards (hydrodynamic as well as morphodynamic) in support of early warning efforts and emergency response.As a first step historical storms that had a significant morphological impact on a representative number of sensitive European coastal stretches were reviewed and analysed in order to understand storm related morphological changes and how often they occur around Europe. Next, an on-line storm prediction system was set up to enable prediction of storm related hydro- and morphodynamic impacts. The system makes use of existing off-the-shelf models as well as a new open-source morphological model. To validate the models at least one year of fieldwork was done at nine pilot sites. The data was safeguarded and stored for future use in an open database that conforms to the OpenEarth protocols.To translate quantitative model results to useful information for Civil Protection agencies the Frame of Reference approach ( [Van Koningsveld et al., 2005] and [Van Koningsveld et al., 2007] ) was used to derive Storm Impact Indicators (SIIs) for relevant decision makers. The acquired knowledge is expected to be directly transferred to the civil society trough partnerships with end-users at the end of the MICORE project.     

Metal microchannel lamination using surface mount adhesives for low-temperature heat exchangers

This paper reports the feasibility of using surface mount adhesives to produce low temperature microchannel arrays in a wide variety of metals. Sheet metal embossing and chemical etching processes have been used to produce sealing bosses that eliminate channel laminae, resulting in approximately 50% material savings over traditional methods. An assembly process using adhesive dispense and cure is outlined to produce leak-free devices. Optimal fill ratios were determined to be between 1.1 and 1.25. Bond strength investigation reveals robustness to surface conditions and a bond strength of 5.5–8.5 MPa using a 3X safety factor. Dimensional characterization reveals a two sigma (95%) post-bonded channel height tolerance under 10% after bonding. Patterning tolerance and surface roughness of the laminae faying surfaces were found to have a significant influence on the final post-bonded channel height. Leakage and burst pressure testing on several samples has established confidence that adhesive bonding can produce leak-free joints. Operating pressures up to 413 kPa have been satisfied, equating to tensile pressure on bond joints of 1.9 MPa. Higher operating pressures can be accommodated by increasing the bond area of devices.     

Solar Disinfection of Water for Inactivation of Enteric Viruses and its Enhancement by Riboflavin

Solar disinfection (SODIS) has been described as a cheap and effective method of treating contaminated water to inactivate pathogenic microorganisms. In this study, SODIS was assessed for its efficacy in inactivating three enteric viruses (coxsackievirus B3, coxsackievirus B5 and poliovirus), either on its own or in the presence of riboflavin as a disinfection enhancer. On its own, SODIS produced a reduction of virus infectivity of 4–6 log₁₀ in 6 h. In the presence of riboflavin, inactivation was more rapid in all viruses studied, and with coxsackievirus B5 and poliovirus an extra 1–2 log₁₀ increase in reduction of infectivity was observed after 6 h exposure. This study provides a practical example of low technology methods which could be utilised to provide safe drinking water in various circumstances.     

Composition of Floating Debris in Harbours of the United States

As part of a programme to characterize floating anthropogenic debris in the aquatic environment, the US Environmental Protection Agency (EPA) conducted 18 field surveys in the harbours of major metropolitan cities of the east, west, and Gulf coasts of the United States and the Mid-Atlantic Bight. the surveys were designed to provide information on the types, relative amounts, and distributions of aquatic debris in different geographic regions of the United States. Neuston nets (0.33 mm mesh) were used to collect surface debris during outgoing tides on two or three consecutive days in selected areas of each city. After each net tow, the debris, which ranged in size from small resin pellets to large plastic sheeting pieces, was identified, categorized, and counted. the data are being used to qualitatively characterize aquatic debris in coastal metropolitan areas, to examine potential regional variations, and to tentatively identify potential sources.     

An invasive riparian tree reduces stream ecosystem efficiency via a recalcitrant organic matter subsidy

A disturbance, such as species invasion, can alter the exchange of materials and organisms between ecosystems, with potential consequences for the function of both ecosystems. Russian olive (Elaeagnus angustifolia) is an exotic tree invading riparian corridors in the western United States, and may alter stream organic matter budgets by increasing allochthonous litter and by reducing light via shading, in turn decreasing in-stream primary production. We used a before-after invasion comparison spanning 35 years to show that Russian olive invasion increased allochthonous litter nearly 25-fold to an invaded vs. a control reach of a stream, and we found that this litter decayed more slowly than native willow. Despite a mean 50% increase in canopy cover by Russian olive and associated shading, there were no significant changes in gross primary production. Benthic organic matter storage increased fourfold after Russian olive invasion compared to pre-invasion conditions, but there were no associated changes in stream ecosystem respiration or organic matter export. Thus, estimated stream ecosystem efficiency (ratio of ecosystem respiration to organic matter input) decreased 14%. These findings show that invasions of nonnative plant species in terrestrial habitats can alter resource fluxes to streams with consequences for whole-ecosystem functions.     

Sensitivity analysis of North American bird population estimates

The Partners in Flight North American Landbird Conservation Plan provided estimates of population sizes for 448 landbird species using a multiplicative model. Input parameters in this calculation included the area of state × Bird Conservation Region polygons, area-specific mean Breeding Bird Survey counts circa 1995, and adjustment factors for the distance over which species may presumably be correctly counted, the assumed pairing of singing males with non-singing females, and variability in the propensity of birds to sing over the course of the survey day. I assessed the sensitivity of this population calculation to changes in the input parameters. I assessed both local and global sensitivity of the model to changes in the parameters with Monte Carlo one-at-a-time simulations and the Fourier amplitude sensitivity test (FAST). Monte Carlo simulations were an estimate of local model sensitivity whereas FAST estimated global model sensitivity, accommodating the potential shared variance between model parameters. Monte Carlo simulations suggested population estimates were 39% more sensitive to changes in the detection distance adjustment than to the other parameters; the other parameters were nearly equal in their contribution to model sensitivity. Conversely, FAST analysis determined that each of the input variables aside from the pair adjustment provided roughly equal contributions to variability in population estimates. The most efficient means for improving continental population estimates for birds surveyed by the Breeding Bird Survey will be through increased scrutiny of the species-specific distance detection and time-of-day adjustments and improved understanding in the spatial and temporal variability in the mean Breeding Bird Survey count.